TA-DC-DD 60W Manual Operation

Model	TA-DC-60DD
Output Power	60KW
Output Current	0-200A
Output Voltage	200-750V (200-1000V optional)
Frequency	L+N+PE
Input Current	95A
Input voltage	AC380V士20%
Gun quantity	ONE/TWO (CCS-1/CCS-2/CHAdeMO/GBT)
Charging way	Quick or Slow charge automatic switch
charging mode	SWIPEARD.APP.MANUAL
Display	5″Color Touch Screen
Networkconnection	Standard configuration :CAN/485/ Ethernet Selective configuration:GPRS/4G
Dimension(cm)	72*45*160
Weight	200KG
OperatingTemperature	-20C to +50°C
Altitude	2000M
IP LEVEL	IP54
Working Relative Humidity	RH≤95%
Input cablelength	0M(Customization Acceptable)
Gun cableLength	5M(Customization Acceptable)
Interface Standard	CCS CHADEMO GB/T
Charging protocol	GBT27930/CHADEMO 2.0/ DIN 701210CPP 1.6(JSON)ISO 15118

1.1   Pre operation inspection

Before running, please carefully check and ensure the following:

·The installation position of the charging station is convenient for operation and maintenance;

· Connect the charging station and accessories correctly and install them firmly;

· Reasonable selection and installation of AC incoming leakage protec- tion circuit breakers;

·The relevant accessories of the charging station are complete, and the charging gun is in a suspended state.

1.2   Power on the device

After all the pre operation inspection items meet the requirements, close the power supply incoming leakage protection circuit breaker. After powering

on, observe the status of the LED indicator light

·Normal standby: The blue light is always on

·Charging status: Green light always on

·Equipment malfunction: Red light always on

1.3  Technical indicators

1. AC input voltage: 380V±15%

2. Grid frequency：50Hz~60HZ

3. Output current level：5A~200A

4. Rated output voltage：  450V～1000V

5. Output voltage range: 200V～750VDC

6. Voltage accuracy: ≤±0.5%

7. Current accuracy: ≥30A：Not more than ±1%；＜30A：Not more than ±0.3A

8. Voltage regulation accuracy:≤±0.5%

9. Steady flow accuracy:≤±1%

10. Ripple coefficient: RMS: no more than ±0.5%; peak value: no more

than ±1%

11. Current unbalance：≤5%

12. Standby power consumption: ≤0.1% output rated power

13. Total harmonic current: ≤5%

14. Efficiency: ≥93%

15. Full load power factor: ≥0.99

16. Load class: continuous operation at rated output current of class I

(100%)

17. Automatic current limiting feature: when the output current exceeds

the output current limiting set value, the constant current output will not

increase the output current

18. Output short-circuit protection: When the output is short-circuited,

the module will protect itself to prevent damage, and it can automatically

resume work after troubleshooting

19. Output overvoltage protection: the output voltage will automatically

stop output when the output voltage exceeds the rated output voltage 5%±5-

VDC to prevent damage to the equipment

20. Start delay: 5S-8S

21. Insulation resistance: ≥10M

22. Dielectric strength: output to ground, input to ground, input to output

2.5KVAC, no arcing and no flashover for 1min

23. Oscillating wave immunity: Class 3 (1MHz and 100kHz)

24. Electrostatic Discharge Immunity: Class 3